Wouxun KG-UV950P RF Power Measurements

Following on from the earlier power tests on my Baofeng HTs, here’s the readings from the Wouxun KG-UV950P. Power is a little lower than specified, but this is probably due to the supply voltage being a bit less than 13.8v. These readings were taken at a supply voltage of 12.88v.

The same frequencies were used, 145.500 & 433.500 for the VHF/UHF tests. For the 6/10m tests 27MHz & 50MHz were used.
The power meter was connected with 1 metre of RG58 dual-screened cable with N-type connectors.


6m: 24W

10m: 23W

VHF: 38W

UHF: 24.9W


6m: 10.9W

10m: 9.3W

VHF: 19W

UHF: 14.2W


6m: 6.8W

10m: 3.5W

VHF: 9.6W

UHF: 9.4W


6m: 3.5W

10m: 1.9W

VHF: 4.8W

UHF: 4.7W

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.