
Here’s my latest project with the Pi: interfacing it with the Sparkfun Geiger counter & outputting the resulting data to a character LCD.
The geiger counter is interfaced with it’s USB port, with the random number generator firmware. A Python script reads from the serial port & every minute outputs CPM & µSv/h data to the display.
The Python code is a mash of a few different projects I found online, for different geiger counters & some of my own customisations & code to write the info to the display & convert CPM into µSv/h.
This also writes all the data into a file at /var/log/radlog.txt
The code for this is below:
import time
import sys
import serial
import os
import RPIO
from RPLCD import CharLCD
from subprocess import *
from datetime import datetime
# configuration settings
logfile = "/var/log/radlog" # location to save log data
serial_port = "/dev/ttyUSB0"
lcd = CharLCD(pin_rs=15, pin_rw=18, pin_e=16, pins_data=[21, 22, 23, 24], numbering_mode=RPIO.BOARD, cols=16, rows=4, dotsize=10) #Init LCD with physical parameters
f = open(logfile,"a")
ser = serial.Serial(serial_port,9600,timeout=1)
one = 0
#Init LCD with initial values.
lcd.cursor_pos = (0, 1)
lcd.write_string("Geiger Counter")
lcd.cursor_pos = (1, 2)
lcd.write_string("Initializing")
lcd.cursor_pos = (2,-3)
lcd.write_string("Please Wait...")
lcd.cursor_pos = (3, 0)
lcd.write_string(str(0) +" uSv/h")
f.write("Geiger Counter Initialized\n")
f.flush()
while 1==1:
stamp = int(time.time())
stamp == round(stamp,0)
stamp = stamp + 60
count = 0
while 1==1:
ct = int(time.time())
ct == round(ct,0)
if ct > stamp: break
#Read from serial port
bit = ser.read(1)
if bit != "":
count = count + 1
#Conversion of counts per minute to uSv/hr
usvh = count * 0.01
at = str(time.asctime())
t = str(time.time())
#Write line to log file & print info to console
f.write("["+at+"."+t+"] "+str(count) + " CPM " +str(usvh) + " uSv/h\n")
f.flush()
print "["+at+"."+t+"] Count "+str(count) + " " + str(usvh) +" uSv/hr"
#Send measurement info to LCD
lcd.clear()
lcd.cursor_pos = (0, 0)
lcd.write_string(datetime.now().strftime('%b %d %H:%M:%S\n'))
lcd.cursor_pos = (1, 0)
lcd.write_string("Radiation Level:")
lcd.cursor_pos = (2, 1)
lcd.write_string(str(count) +" CPM")
lcd.cursor_pos = (3, -1)
lcd.write_string(str(usvh) +" uSv/h")

