Posted on Leave a comment

New Scope!

Alas, my old trusty Hameg HM303 30MHz oscilloscope has finally died. I’ve had this scope for many years, an eBay buy when I noticed they were going cheap.

It’s been replaced with a brand new Rigol DS1054Z, a 4-channel 50MHz DSO.

Scope
Scope

This is a big jump from the old analogue CRT scope I was using, it’s certainly going to be a steep learning curve!

System Info
System Info

I chose this scope through the help of the EEVBlog & it’s associated forums. Through this I discovered that I could upgrade the scope with a key to enable some extra features! In the above screenshot, the key has been applied, and the model number now shown is the DS1104Z.

This is the next scope up in the model chain, with many more triggering options, serial decoders, higher memory depth, recording & 100MHz bandwidth. While I rarely need to measure anything higher than in the kHz range, these options will definitely come in useful! The list of installed options is below:

Installed Options
Installed Options

And now for some sample waveforms, the scope has the option to save screenshots to USB flash disks, so when I make posts with waveforms in the future, the need to photo the screen of the scope is gone!

DS1Z_QuickPrint1 DS1Z_QuickPrint2 DS1Z_QuickPrint3 DS1Z_QuickPrint6 DS1Z_QuickPrint7 DS1Z_QuickPrint8 DS1Z_QuickPrint9